KEBA P30 a-series charging station with cable (up to 11kW)

  • Up to 11.1 kW
  • Option – RFID reader
  • 6m cable attached
  • Operating in Three-phase
  • Universal charging station
  • Designed and made in EU

from 774,40 

640,00  (ex. VAT)

Clear

This KEBA KeContact P30 a-series charging station is designed to operate in three-phase electric installations at maximum 11.1kW charging power.

It will therefore recharge your electric vehicle with an intensity that you can adjust between 10A and 16A, on a three-phase electric circuit. Thanks to that, this charging station parameters can be modified in the future if the maximum available power from the network evolves.

It is a charging station that operates in plug & charge mode (the automatic recharging process starts as soon as an electric vehicle is plugged in). RFID reader is available as an option. With this option, only authorized users, having a registered RFID card or badge into charging station’s memory, can charge.

This charging station is universal and has a 6m cable with Type 2 connector. It is compatible with any brand of electric or rechargeable hybrid vehicle (plug-in) having a Type 2 socket, the European standard for these vehicles.

The Keba P30 charging station has a unique automatic reset function that allows it to resume the charging process after a power cut, an overheat or any other event that would disrupt its operation.

In addition, this wall terminal is designed and manufactured in the European Union. It meets therefore all the European standards that are essential for your safety and has been CE certified.

Main use: Autonomous private installations and small companies

KEBA P30 a-series charging stations are built for offline mode charging (not connected to a network). If you seek for a charging station that you can monitor and pilot remotely, then the KEBA P30 x-series et c-series product range is the best choice for you.

Technical information

Cable with connector
Type 2 Plug 300x279 - KEBA P30 a-series charging station with cable (up to 11kW)
Type 2 (European standard)

 

Charging specifications
Maximum charging power from 6.9 kW to 11.1 kW
from 2.3 kW to 3.7 kW (if single-phase)
Charging process Automatic on connection (Plug & charge)
RFID card
Charging mode Mode 3
Operating voltage 3 x 230V / 400V (50Hz)
Selectable max. charging current 10 A / 13 A / 16 A
Charging current selection DIP switches
Connector type Cable with Type 2 connector: 32 A / 400 V CA
according to EN 62196-1 and VDE-AR-E2623-2-2
Protections
Residual direct current detecting device (RDC-DD) > 6 mA (characteristic in accordance with IEC 62955, < 10 s)
Protection against mechanical impact IK08
Operating temperature -25°C à +50°C (without direct sunlight)
Rated short-time withstand current < 10 kA (effective value in accordance with EN 61439-1)
Temperature management Automatic power reduction in case of overheating
Other specifications
Weight ~ 7 kg
Dimensions (HxWxD) 643 mm x 240 mm x 166 mm
Cable length 6 m
Interfaces USB and Ethernet RJ45
Main color White
Power supply Three-phase alternating current with neutral (AC)
Required power cable 5G2.5 mm²
Certifications
Conformity CE
Norms IEC 61851
IEC 62196
Origin Designed and manufactured in European Union
KEBA references 119 924 / 119.924 / 119924 / KC-P30-EC220432-000
119 928 / 119.928 / 119928 / KC-P30-EC220432-00R

Scope of delivery:

  • 1 charging station for electric vehicles and plug-in hybrids
  • 1 wall mounting kit
  • Installation and user manuals

Leading time: approximately 2 weeks

RFID reader

Without, With

Download

Notes

  • Which charger to choose for your electric vehicle?
  • This charging station requires three-phase alternating current with neutral (400V) in order to operate at maximum power.
  • Thanks to its integrated protection against DC current leakage, there is only need to add a Type A RCD on the network line.
  • The price indicated corresponds to the charging terminal without installation, the images are provided for illustration purposes.

See also: …

Scroll to Top