This KEBA KeContact P30 a-series charging station is designed to operate in three-phase electric installations at maximum 22.2kW of charging power.
It will therefore recharge your electric vehicle with an intensity that you can adjust between 10A and 32A, on a three-phase electric circuit. Thanks to that, this charging station parameters can be modified in the future if maximum available power from the network evolves.
This charging station can be equipped with a Type 2 socket with shutters (Type 2S / T2S) for safety enhancement, depending on selected version.
It is a charging station that works in plug & charge mode (automatic recharging as soon as an electric vehicle is plugged in). RFID reader is available as an option. With this option, only authorized users, having a registered RFID card or badge into the charging station’s memory, can charge.
This charging station is universal. It is compatible with any brand of electric or hybrid plug-in vehicle having a Type 2 socket, the European standard for these vehicles.
The Keba P30 charging station has a unique automatic reset function that allows it to resume the charging process after a power cut, an overheat or any other event that would disrupt its operation.
In addition, this wall terminal is designed and manufactured in the European Union. It meets all the European standards that are essential for your safety and has been CE certified.
Main use: Autonomous private installations
KEBA P30 a-series charging stations are built for offline mode charging (not connected to a network). If you seek a charging station that you can monitor and pilot remotely, then the KEBA P30 x-series et c-series product range is the best choice for you.
|Socket with locking system|
|Type 2 / Type 2S|
|Maximum charging power||from 6.9 kW to 22.2 kW|
from 2.3 kW to 7.4 kW (if single-phase)
|Charging process||Automatic on connection (Plug & charge)|
|Charging mode||Mode 3|
|Operating voltage||3 x 230V / 400V (50Hz)|
|Selectable max. charging current||10 A / 13 A / 16 A / 20 A / 25 A / 32 A|
|Charging current selection||DIP switches|
|Socket type||Type 2 standard socket: 32 A / 400 V CA|
according to EN 62196-1 and VDE-AR-E2623-2-2 with or without shutter
|Residual direct current detecting device (RDC-DD)||> 6 mA (characteristic in accordance with IEC 62955, < 10 s)|
|Protection against mechanical impact||IK08|
|Operating temperature||16A: -25°C à +50°C (without direct sunlight)|
32A: -25°C à +40°C (without direct sunlight)
|Rated short-time withstand current||< 10 kA (effective value in accordance with EN 61439-1)|
|Temperature management||Automatic power reduction in case of overheating|
|Weight||~ 5 kg|
|Dimensions (HxWxD)||516 mm x 240 mm x 166 mm|
|Interfaces||USB and Ethernet RJ45|
|Power supply||Three-phase alternating current with neutral (AC)|
|Required power cable||5G6 mm²|
|Origin||Designed and manufactured in European Union|
|KEBA references||119 921 / 119.921 / 119921 / KC-P30-ES240032-000|
119 922 / 119.922 / 119922 / KC-P30-ESS40032-000
119 925 / 119.925 / 119925 / KC-P30-ES240032-00R
119 926 / 119.926 / 119926 / KC-P30-ESS40032-00R
Scope of delivery:
- 1 charging station for electric vehicles and plug-in hybrids
- 1 wall mounting kit
- Installation and user manuals
Leading time: approximately 2 weeks