KEBA P30 a-series charging station with cable (up to 7.4kW)

  • Up to 7.4 kW
  • Option – RFID reader
  • 6m cable attached
  • Operating in Single-phase
  • Universal charging station
  • Designed and made in EU

from 798,60 

660,00  (ex. VAT)


This KEBA KeContact P30 a-series charging station is designed to operate in single-phase electric installations at maximum 7.4kW charging power.

It will therefore recharge your electric vehicle with an intensity that you can adjust between 10A and 32A, on a three-phase electric circuit. Thanks to that, this charging station parameters can be modified in the future if maximum available power from the network evolves.

It is a charging station that works in plug & charge mode (automatic recharging as soon as an electric vehicle is plugged in). RFID reader is available. With this option, only authorized users, having a registered RFID card or badge into charging station’s memory, can charge.

This charging station is universal and has a 6m cable with Type 2 connector. It is compatible with any brand of electric or rechargeable hybrid vehicle (plug-in) having a Type 2 socket, the European standard for these vehicles.

The Keba P30 charging station has a unique automatic reset function that allows it to resume the charging process after a power cut, an overheat or any other event that would disrupt its operation.

In addition, this wall terminal is designed and manufactured in the European Union. It meets all the standards that are essential for your safety and has been CE certified.

Main use: Autonomous private installations

KEBA P30 a-series charging stations are built for offline mode charging (not connected to a network). If you seek charging station that you can monitor and pilot remotely, then KEBA P30 x-series et c-series product range is the best choice.

Technical information

Cable with connector
Type 2 Plug 300x279 - KEBA P30 a-series charging station with cable (up to 7.4kW)
Type 2 (European standard)


Charging specifications
Maximum charging power from 2.3 kW to 7.4 kW
Charging process Automatic on connection (Plug & charge)
RFID card
Charging mode Mode 3
Operating voltage 230V (50Hz)
Selectable max. charging current 10 A / 13 A / 16 A / 20 A / 25 A / 32 A
Charging current selection DIP switches
Connector type Cable with Type 2 connector: 32 A / 400 V CA
according to EN 62196-1 and VDE-AR-E2623-2-2
Residual direct current detecting device (RDC-DD) > 6 mA (characteristic in accordance with IEC 62955, < 10 s)
Protection against mechanical impact IK08
Operating temperature 16A: -25°C à +50°C (without direct sunlight)
32A: -25°C à +40°C (without direct sunlight)
Rated short-time withstand current < 10 kA (effective value in accordance with EN 61439-1)
Temperature management Automatic power reduction in case of overheating
Other specifications
Weight ~ 7 kg
Dimensions (HxWxD) 643 mm x 240 mm x 166 mm
Cable length 6 m
Interfaces USB and Ethernet RJ45
Main color White
Power supply Single-phase alternating current (AC)
Required power cable 3G6 mm²
Conformity CE
Norms IEC 61851
IEC 62196
Origin Designed and manufactured in European Union
KEBA references 120 283 / 120.283 / 120283 / KC-P30-EC240431-000
120 286 / 120.286 / 120286 / KC-P30-EC240431-00R

Compatible vehicles

Any plug-in hybrid (rechargeable) or electric vehicle having a Type 2 is able to charge on alternating current thanks to this charging station. Most vehicles can charge at 7.4 kW. You will find the list of compatible vehicles hereafter (not exhaustive):

  • Plug-in hybride vehicles (rechargeable)
  • Electric vehicles charging at 11 kW – [charging limited to 3.7 kW]
  • Electric vehicles charging at 22 kW – [charging limited to 7.4 kW]
  • Electric vehicles charging at 7.4 kW
    • Audi Q4 35 e-tron, Audi e-tron GT, Audi e-tron Sportback
    • Citroën ë-C4, Citroën ë-Jumper, Citroën ë-Jumpy, Citroën ë-SpaceTourer
    • Dacia Spring
    • Honda e
    • Hyundai Ioniq electric, Hyundai Kona electric
    • Kia e-Niro, Kia, e-Soul, Kia Soul EV
    • Nissan Ariya, Nissan Leaf, Nissan e-NV200
    • Opel Corsa-e, Opel Mokka-e, Opel Vivaro-e, Opel Zafira-e Life
    • Peugeot e-208, Peugeot e-2008, Peugeot e-Boxer, Peugeot e-Expert, Peugeot e-Traveller
    • Porsche Taycan 4S, Porsche Taycan 4S Plus, Porsche Taycan Turbo, Porsche Taycan Turbo S
    • Renault Twingo electric, Renault Megane electric, Renault Zoe
    • Seat Mii electric
    • Skoda CITIGOe iV, Skoda Enyaq iV 50
    • Volkswagen e-up!, Volkswagen e-up! 2.0, Volkswagen ID.3 Pure, Volkswagen ID.4 (52 kWh)
  • Find my vehicle

Lead time: Expect a couple weeks before shipping

Scope of delivery:

  • 1x Charging station for electric vehicles
  • 1x Wall mounting kit
  • Installation and user manuals
RFID reader

Without, With



  • Which charger to choose for your electric vehicle?
  • Thanks to its integrated protection against DC current leakage, there is only need to add a Type A RCD on the network line.
  • The price indicated corresponds to the charging terminal without installation, the images are provided for illustration purposes.

See also: …

Scroll to Top