KEBA P30 a-series charging station with cable (up to 22kW)

  • Up to 22.2 kW
  • Option – RFID reader
  • 6m cable attached
  • Operating in Three-phase
  • Universal charging station
  • Designed and made in EU
  • Availability: on order only (delay: about 6 weeks)

from 695,00 

695,00  (ex. VAT)

This KEBA KeContact P30 a-series charging station is designed to operate in three-phase electric installations at maximum 22.2kW charging power.

It will therefore recharge your electric vehicle with an intensity that you can adjust between 10A and 32A, on a three-phase electric circuit. Thanks to that, this charging station parameters can be modified in the future if maximum available power from the network evolves.

It is a charging station that works in plug & charge mode (automatic recharging as soon as an electric vehicle is plugged in). RFID reader is available. With this option, only authorized users, having a registered RFID card or badge into charging station’s memory, can charge.

This charging station is universal and has a 6m cable with Type 2 connector. It is compatible with any brand of electric or rechargeable hybrid vehicle (plug-in) having a Type 2 socket, the European standard for these vehicles.

The Keba P30 charging station has a unique automatic reset function that allows it to resume the charging process after a power cut, an overheat or any other event that would disrupt its operation.

In addition, this wall terminal is designed and manufactured in the European Union. It meets all the standards that are essential for your safety and has been CE certified.

Main use: Autonomous private installations

KEBA P30 a-series charging stations are built for offline mode charging (not connected to a network). If you seek charging station that you can monitor and pilot remotely, then KEBA P30 x-series et c-series product range is the best choice.

Technical information

Cable with connector
Type 2 Plug 300x279 - KEBA P30 a-series charging station with cable (up to 22kW)
Type 2 (European standard)


Charging specifications
Maximum charging powerfrom 6.9 kW to 22.2 kW
from 2.3 kW to 7.4 kW (if single-phase)
Charging processAutomatic on connection (Plug & charge)
RFID card
Charging modeMode 3
Operating voltage3 x 230V / 400V (50Hz)
Selectable max. charging current10 A / 13 A / 16 A / 20 A / 25 A / 32 A
Charging current selectionDIP switches
Connector typeCable with Type 2 connector: 32 A / 400 V CA
according to EN 62196-1 and VDE-AR-E2623-2-2
Residual direct current detecting device (RDC-DD)> 6 mA (characteristic in accordance with IEC 62955, < 10 s)
Protection against mechanical impactIK08
Operating temperature16A: -25°C à +50°C (without direct sunlight)
32A: -25°C à +40°C (without direct sunlight)
Rated short-time withstand current< 10 kA (effective value in accordance with EN 61439-1)
Temperature managementAutomatic power reduction in case of overheating
Other specifications
Weight~ 7 kg
Dimensions (HxWxD)643 mm x 240 mm x 166 mm
Cable length6 m
InterfacesUSB and Ethernet RJ45
Main colorWhite
Power supplyThree-phase alternating current with neutral (AC)
Required power cable5G6 mm²
NormsIEC 61851
IEC 62196
OriginDesigned and manufactured in European Union
KEBA references122 119 / 122.119 / 122119 / KC-P30-EC240432-000-GE
122 120 / 122.120 / 122120 / KC-P30-EC240432-00R-GE

Compatible vehicles

Any plug-in hybrid (rechargeable) or electric vehicle having a Type 2 is able to charge at its maximum on alternating current thanks to this charging station. There is not many vehicles charging at 22.2 kW. You will find the list of compatible vehicles hereafter (not exhaustive):

  • Plug-in hybride vehicles (rechargeable)
  • Electric vehicles charging at 7.4 kW
  • Electric vehicles charging at 11 kW
  • Electric vehicles charging at 22 kW
    • Audi e-tron, Audi e-tron GT, Audi e-tron Sportback
    • BYD e6
    • Byton M-Byte
    • Citroën ë-Jumper
    • Fiat e-Ducato
    • Mercedes EQS
    • Nissan Ariya (87 kWh)
    • Peugeot e-Boxer
    • Porsche Taycan 4S, Porsche Taycan 4S Plus, Porsche Taycan Turbo, Porsche Taycan Turbo S
    • Renault Twingo electric, Renault Megane electric, Renault Zoe Q210/R240, Renault Zoe Q90/R90
    • Smart EQ forfour, Smart EQ fortwo, Smart For-Two ED
    • Twike 5
    • Volvo XC40 Recharge
  • Find my vehicle

Lead time: Expect a couple weeks before shipping

Scope of delivery:

  • 1x Charging station for electric vehicles
  • 1x Wall mounting kit
  • Installation and user manuals
RFID reader

Without, With



  • Which charger to choose for your electric vehicle?
  • This charging station requires three-phase alternating current with neutral (400V) in order to operate at maximum power.
  • Thanks to its integrated protection against DC current leakage, there is only need to add a Type A RCD on the network line.
  • The price indicated corresponds to the charging terminal without installation, the images are provided for illustration purposes.

See also: …

Scroll to Top