KeContact E10 Smart Energy Meter (1 phase)

  • Smart power meter KeContact E10
  • Dynamic power load management for KEBA charging stations

223,85  VAT incl. (185,00  without VAT)

The KeContact E10 energy meter measures the electricity consumption of your electric circuit.

Thanks to this meter, KEBA charging stations constantly monitor the total consumption of your electric installation.
This allows the charging stations to automatically regulate their charging power in order to reduce it if necessary and avoid breaking your circuit.
The adaptation of the charging current is done dynamically and is transparent to the user.

Benefits :

 

  • Fast charging when power is available
  • Overload protection
  • Easy to install and commission, even on existing structures, thanks to the clamp-on current transformers included
  • Current measurable up to 63 A (maximum)
  • Single-phase or three-phase power measurement in both directions
  • Allows excess PV load to be used with systems intended for
  • Standard DIN rail mounting system (2 DIN units)

Specifications

Operating conditions
Ambient temperature during transportation and storage-25 ° C to 70 ° C
Mechanical data
Fire resistanceUL94-V0
Case width4 DIN units
Measures precision
Phase current+/- 0,2%
Voltage+/- 0,2%
Active power+/- 0,5%
Reactive power+/- 0,5%
Frequency+/- 0,1%
Power factor+/- 0,5%
Norms
EN 61010-2-030Yes
EN 61010-2-201Yes
EN 61326-1Yes
ESD (IEC 61000-4-2)
  • 8 kV air discharge
  • 4 kV contact discharge
HF radiation (IEC 61000-4-3)3 Vm
10 Vm if there is an increased deviation in the measurement accuracy
Burst (IEC 61000-4-4)
  • Network: 4 kV
  • Ethernet: 2 kV
Surge (IEC 61000-4-5)
  • L-L: 1 kV
  • L-N: 2 kV
  • Ethernet: 1 kV
Conducted disturbances (IEC 61000-4-6)150 kHz … 80 MHz, 10 V (effective value)
Magnetic field (IEC 61000-4-8)30 A / m
Voltage drops (IEC 61000-4-11)
  • 100%, 20 ms (remains active)
  • 30%, 500 ms (active / restart)
  • 60%, 200 ms (active / restart)
  • 100%, 5 s (restart)
Interference voltage (EN 55011)Network, class B
Interference current (EN 55011)Ethernet, class B
Electromagnetic interference (EN 55011)30 MHz … 1 GHz, class B
Harmonics (EN 61000-3-2)Network, class A
Voltage fluctuations (EN 61000-3-3)Network
Central unit processor data
CPU / processorARM9 processor at 450 MHz
RAM256 Mb
Host interfaces2 LAN (10/100 Mbit)
2 RS485 (semi-duplex, max.115200 bauds)
Voltage and current inputs
Supply voltageL1/N: 110 V ~ / 230 V ~ ± 10%
Power consumption5,0 W. max
Rated voltage230/400 V AC max.
Limiting current63A

See also: …

Scroll to Top